CR0101, 400ml, 12pcs/carton, 2500cartons/30000pcs for 20ft container
Art No. CR0101
Mending Holes Car Tyre Sealant And Inflator
1.PLYFIT Tyre Sealer & Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. 2. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. 3.One step procedure of tyre pumping and repairing is finished in seconds. 4.It can also be filled into new tyres to prevent unexpected leakage. 5.Non-toxic and odorless. 6.No corrosion and no damage to the tire.
1. Quickly seek-out and effectively seal most normal punctures and slow leaks.
2. No jack nor tyre-change is needed.
3. Simple operation
4. Prevent unexpected leakage
5. Non-toxic and odorless,No corrosion and no damage to the tire.
Storage Condition:Keep it out of touch of children; store it in cool, dry and well-ventilated place. The storage temperature shall range 0-45℃.
Shelf Life: 2 years
1. If possible remove object causing puncture. 2. Deflate the tyre; Shake the can well before use; 3. Screw connecting tube firmly onto tyre valve; Hold the can upright-buttonuppermost-remove protector cap-press button until tyre appears firm. 4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Free samples are available; we can customize special samples for you.